manualshive.com logo in svg

Hanna Instruments HI83326, Instruction Manual, Page: 51 / 80

Share
Download
Hanna Instruments HI83326 Instruction Manual Download Page 51

51

METHOD PROCEDURES

51

51

CY

ANURIC ACID

10.8.  CYANURIC ACID

SPECIFICATIONS

Range 

0 to 80 mg/L (as CYA)

Resolution 

1 mg/L

Accuracy 

±1 mg/L ±15% of reading at 25 °C

Light Source 

LED with narrow band interference filter @ 525 nm

Method 

Adaptation of the Turbidimetric Method

REQUIRED REAGENTS
Code Description 

Quantity

HI93722-0

 

Cyanuric Acid Reagent 

1 packet

REAGENT SETS

HI93722-01

 

Reagents for 100 tests

HI93722-03

 

Reagents for 300 tests

For other accessories see ACCESSORIES section.

MEASUREMENT PROCEDURE

• Select the 

Cyanuric Acid

 method using the procedure described in the METHOD SELECTION section.

• Fill the first cuvette with 10 mL of unreacted sample (up to 

the mark). Replace the plastic stopper and the cap.

• Insert the cuvette into the holder and close the lid.

• Press 

Zero

. The display will show “-0.0-” when the meter is zeroed and ready for measurement.

 

 

10 mL
# 1

# 1

Summary of Contents for HI83326

















































































Reviews:

No comments