Wiring & Controller Settings Configuration
10
Comm Protocol (Communication Protocol)
Parameter indicates supported transmission mode (Modbus RTU).
Parameter
Options
Default
Modbus Protocol
Modbus RTU
Modbus RTU
Net Address
01 to 99
01
Baud Rate
9600, 19200, 38400, 57600, 115200, 256000
19200
Parity
None, Even, Odd
None
Stop Bits
1 or 2 bits
1 bit
RemLink_Timeout
60 to 1200 seconds
60 seconds
RemEdit_Timeout
30 to 1200 seconds
30 seconds
Bit Length
7 or 8 bits
8 bits
Net Address:
sets the controller’s Modbus address.
• With item selected, press
Set
to modify.
• Press the
ud
keys to increase or decrease the value (keep the key
pressed to increase editing speed). Press
CFM
to save.
Baud Rate:
Set the desired speed for the serial communication (baud rate in bps.).
• With item selected, press
Modify
for the drop‑down list to display.
• Use the
ud
keys to navigate between options. Press
Select
to save.
Note:
The controller and the Modbus Server must have the same Baud Rate.
Parity:
sets communication parity based on the parity mode of the connected device.
• With item selected, press
Modify
for the drop‑down list to display.
• Press the
ud
keys to navigate between options. Press
Select
to save.
Stop Bits:
sets stop bit option based on the stop bit of the connected device.
• With item selected, press
Modify
for the drop‑down list to display.
• Use the
ud
keys to navigate between options. Press
Select
to save.
