manualshive.com logo in svg

Hanna Instruments HI 83099, Instruction Manual, Page: 125 / 136

Share
Download
Hanna Instruments HI 83099 Instruction Manual Download Page 125

125

SPECIFICATIONS

Range

0 to 100 mg/L

Resolution

5 mg/L

Accuracy

±5 mg/L ±3% of reading at 25 °C

Light Source

Tungsten lamp with narrow band interference filter @ 466 nm

Method

Sulfate is precipitated with barium chloride crystals. Light absorbance of the suspension

is measured.

REQUIRED REAGENTS

Code

Description

Quantity

HI 93751-0

Indicator  reagent

1 packet

REAGENT SETS

HI 93751-01

Reagents for 100 tests

HI 93751-03

Reagents for 300 tests

For other accessories see page 132.

MEASUREMENT PROCEDURE

Note

: for sample preparation follow the COLORED OR TURBID SAMPLES procedure on page 17.

• Select the 

Sulfate method using the procedure described

in the 

Method Selection section (see page 12).

• Fill a cuvette with 10 mL of unreacted sample (up to

the mark) and replace the cap.

• Place the cuvette into the holder and close the lid.

• Press the 

Zero

 key. The display will show “

-0.0-

” when the meter is zeroed and ready for

measurement.

• Remove the cuvette.

Sulfate

SULFATE

10 mL

Summary of Contents for HI 83099









































































































































Reviews:

No comments