13
Note
The default password is set at “0000”.
•
The LCD will display “SET” on the upper part and
“c.00” on the lower, allowing the user to edit setup
parameters (see table below).
•
Enter the code of the parameter you want to set, using the arrow keys as per the
password procedure above (e.g. 41).
•
Confirm the code by pressing CFM and the default or the previously memorized value
will be displayed with the first digit blinking.
Note
When the password is not inserted or a wrong password is confirmed, the display will
only show the previously memorized value, without blinking (read only mode). In this
case, the value cannot be set. Press LCD and start again.
• Enter the desired value using the arrow keys and then press CFM.
• After confirmation, the selected parameter is displayed.
The user can scroll through the parameters by pressing
CFM.
In order to directly set another parameter, press
SETUP again and enter the code or scroll to it by
pressing CFM.
The following table lists the setup codes along with
the description of the specific setup items, their valid values and whether password is
required to view that item (“PW” column):
