53
• Press
,
or
to select the desired
Log Report type. All logged lots for the selected Log
Report type will be displayed on the LCD.
• To filter the displayed lots, press
and then the
desired parameter. Only the selected measurement
parameter lots will be displayed on the LCD.
• Select the desired lot with
or
and
press
to display the logged data from the
highlighted lot. The “Please wait...” message will
be displayed on the LCD for one second. The selected
Logging Data Configuration options will be displayed
on the LCD, together with GLP information (last calibra-
tion date and calibrated standards) if a calibration
has been performed on the selected mode and the
logged values (measured value, temperature value,
temperature compensation mode and the logging
time).
Note: For automatic logging only, it is possible to
view the plotted graph.
• Press
to display the graph.
• By pressing
it is possible to move the graph
along the X or Y axis with the arrow keys.
• If pressing
while the graph is displayed, the
zoom menu for the X and Y axes will be accessed.
Press
, or
to switch between the active
zooming axes and then zoom in or out on the selected
axis by pressing the appropriate virtual key.
• Press
to return to the previous menu at any
time.
LOGGING
