51
There are 5 ways the Reading Mode and Log may be configured together. The table below shows
the combinations and indicates where the completed log will be stored.
2) Direct Reading Mode and Manual Log:
Real time continuous measurements are on display and
snapshots of measurement data are stored in the Manual log
when the user presses
. Subsequent snapshots will
be added to the same Manual Lot every time the
is depressed unless
New Lot
is selected under Log options.
Note: When the
is pressed the lot ID along
with the current record number will appear for short
time on the selected channel window on the top/
left corner (e.g. L001_DO 14 - this means lot ID
L001_DO and recod number 14).
1) Direct Reading Mode and Automatic Log:
Real time continuous measurements are on display and
continuous logs to meter memory. These are sometimes
referred as interval logs. Press
.
LOGGING
Reading Mode
Log
log Recall
Direct
Automatic (1)
Automatic Log
Manual (2)
Manual Log
Auto Hold (NA)
Not Applicable
Direct/AutoHold
Automatic (3)
Automatic Log
Manual (4)
Manual Log
Auto Hold (5)
Manual Log
