25
Measurement Unit
The user can select the desired measurement unit. The available options are: % Sat, mg/L or ppm.
% Saturation is correct for any solvent measurement of dissolved oxygen. mg/L and ppm are used for
concentration measurement in water only.
• Press
while in
DO
mode.
• Press
.
• Use
or
to highlight the
Measurement
Unit
option.
• Press
.
• Use
or
to select % Sat or mg/L or
ppm.
• Press
to confirm your selection or press
to cancel operation.
Clear Calibration
Accessing this option, the existent DO calibration can be cleared. If the calibration is cleared a default
meter calibration is used. Another sensor calibration should be performed.
To
clear calibration
:
• Press
while in
DO
mode.
• Press
.
• Use
or
to highlight the Calibration option.
• Use
or
to highlight the
Clear Calibration
option.
• Press
. A pop-up menu will be displayed asking for confirmation (if calibration is available).
• Press
to confirm or press
to escape without saving and return to the Calibration
options.
DO SETUP
