33
Sampling Period
This option allows the user to select the desired sampling period for automatic logs.
To set the Sampling Period:
• Press
while in
Conductivity mode.
• Press
.
• Use
or
to highlight the
Log option.
• Press
and use
or
to highlight the
Sampling Period option.
• Press
and use
or
to select the desired
option.
• Press
to confirm your selection or press
to
cancel operation.
New Lot
This option is used to create a new lot when manual logging is used.
Note
: If
New Lot option is accessed and the Logging Type is Automatic, a warning message appears on the LCD
informing the user that a new lot can be created only if the
Logging Type is set as Manual.
To generate a New Lot:
• Press
while in
Conductivity mode.
• Press
.
• Use
or
to select the
Log option.
• Press
and use
or
to highlight the
New Lot option.
• Press
to generate a new manual lot. A pop-up menu will be displayed asking for confirmation.
• Press
to confirm or press
to escape without saving and return to the
Log options.
Alarm
This option allows the user to select the alarm settings:
Alarm State and Alarm Limits. If the Alarm option
is enabled, a continuous double beep will be heard, along with the “
Alarm
” indicator blinking on the LCD,
each time the set limits in
Measure mode are exceeded.
Note:
Alarm Beeper must be set On for audible beep to be heard. See:
System Setup
→
Beeper
→
Alarm.