32
Automatic - the measurement data is logged automatically at constant time intervals.
Manual - a snapshot of the displayed measurement data is logged with time stamp when the user manually
depresses Log.
Auto Hold - this is configured along with the Direct/AutoHold reading mode to take a snapshot of stable
measurement data. Press
to initiate a logging session. Press
to initiate an Auto
Hold event. The log occurs automatically once measurement stability is reached. This type log
removes subjective data, as it only captures stable measurements.
To set the Logging Type:
• Press
while in
Conductivity mode.
• Press
.
• Use
or
to highlight the
Log option.
• Press
and use
or
to highlight the
Logging Type option.
• Press
and use
or
to highlight the
desired option.
• Press
to confirm your selection or press
to
cancel operation.
Logging Data Configuration
This option allows the user to select which parameters will accompany a log File:
Date/Time, Calibration
Data, Sample ID, Instrument ID, Operator ID, Company Name, Additional Info 1 and Additional Info 2.
To set the Logging Data Configuration:
• Press
while in
Conductivity mode.
• Press
.
• Use
or
to highlight the
Log option.
• Press
and use
or
to highlight the
Logging Data Configuration option.
• Press
and use
or
to highlight the
desired parameter to be logged in file.
• Press
to enable the parameter or
to disable it.
• Press
to return to previous menu.