manualshive.com logo in svg

Hanna Instruments GROLINE MONITOR HI981420, Instruction Manual, Page: 6 / 44

Share
Download
Hanna Instruments GROLINE MONITOR HI981420 Instruction Manual Download Page 6

6 

SPECIFICA

TIONS

Temperature Specifications

Additional Specifications

Probe

HI1285‑8

 pH/EC/TDS/temperature polypropylene 

body, pre‑amplified multiparameter probe with internal 
temperature sensor DIN connector and 2 m (6.6’) cable 
Max Pressure: 0.2 bar
pH range: 0 to 13 pH
IP68 (continous immersion up to 2 meters)

Automatic Logging

Measurements (pH, EC, TDS, Temperature)  
min/max/average/status logged continuously at 15 
minutes interval
Recall graphic modes
Export on USB‑C flash drive or PC
Log files in CSV format
30 days stored data at 15 minutes interval

Display 

128 x 64 pixel B/W LCD with green backlight 
Automatic backlight dimming using ambient light sensor

GLP

Good Laboratory Practice with last 5 pH and EC 
calibration history.

Monitor Waterproof Protection

IP65 (dust and low pressure water jets)

Alarms

High and Low with enable/disable option for all 
parameters.

Range

0.0 to 60.0 °C / 32.0 to 140.0 °F

Resolution

0.1 °C / 0.1 °F

Accuracy 

±0.5 °C /±1 °F

Summary of Contents for GROLINE MONITOR HI981420













































Reviews:

No comments