manualshive.com logo in svg

Hanna Instruments GROLINE MONITOR HI981420, Instruction Manual, Page: 41 / 44

Share
Download
Hanna Instruments GROLINE MONITOR HI981420 Instruction Manual Download Page 41

41

DA

TA ST
ORAGE

Export to PC

Highlight History from Menu and press

 Options

 function.

Connect an USB cable between the PC and monitor.
Highlight 

Export to PC

 using 

▲▼

, then                                                                         

press 

Select

. 

After connection the file will be displayed from the 

GroLine  

Monitor

. Open the file and save to PC in desired format, name 

and location.          
                                                      
If  the  USB  cable  is  missing  or  not  detected  the  monitor  displays                                                                                                                            
a warning message: 

The transferred data is saved to the USB flash drive in a file named as "GLMxxxxy.csv", where "xxxx" 
represents the unit's ID and "y" represents a letter from A to Z. This file name format helps to avoid 
overwriting the same file. In case of all letters are used, the overwrite warning appears and the 
"GLMxxxA.csv" will be replaced. (See exemple in Export to Flash drive). 
Logged data are formated as configured in the Decimal Separator parameter (*.csv) and can be 
opened with any text editor or spread sheet program.
Suggested settings for correct formating: use period field 
separator for Western Europe character set (ISO‑88859‑1). 
Adjust font or column width appropriately.

Clear History

Highlight 

History

 from Menu and press 

Options

. Highlight 

Clear

 

History

 using 

▲▼

, then press 

Select

 to permanently 

delete the entire logged History. Press 

Accept

 to initiate  

procedure or 

Cancel

  to  return  to  History  Options  without  clear.                                                                        

If the USB flash drive is missing or not detected, the  
monitor displays a warning message: 

Summary of Contents for GROLINE MONITOR HI981420













































Reviews:

No comments