manualshive.com logo in svg

Hanna Instruments GROLINE MONITOR HI981420, Instruction Manual, Page: 36 / 44

Share
Download
Hanna Instruments GROLINE MONITOR HI981420 Instruction Manual Download Page 36

36 

OPERA

TIONAL GUIDE

The first two functional buttons selects the parameter, while  
in the title bar, the current unit of the selected parameter  
is indicated.

Press 

Details

 button to access information regarding selected parameters: current reading, Max/ 

Min reading and average.

Status Bar Messages

Whenever an event is triggered the status bar will show it in measure screen.
Possible events:
  •

 

"Logging disabled" ‑ When Date and Time isn't set or the Real Time Clock is malfunctioning.    

      The backlight will blink.

  •

 

"pH/EC/TDS/Temp. Out of Range" ‑ measurements have exceeded the Monitor  

     specifications. The backlight and the affected parameter will blink.

 

    Note: For same parameter, alarms and other warnings will not be visible while "Out of                  

             Range" message presists. This has higher priority than alarms and warnings.

Summary of Contents for GROLINE MONITOR HI981420













































Reviews:

No comments