manualshive.com logo in svg

Hanna Instruments GROLINE MONITOR HI981420, Instruction Manual, Page: 21 / 44

Share
Download
Hanna Instruments GROLINE MONITOR HI981420 Instruction Manual Download Page 21

21

GENERAL OPERA

TIONS

Decimal Separator
Option:

 Comma ( , ) or Period ( . )

Press the functional key to select the desired decimal  
separator or press 

Escape 

to return to general menu without 

saving the new format. The decimal separator is used on  
the measurement screen and CSV files.

Language

Press the Modify key to change the Language. Use the  

▲▼

 keys to select the desired language. Press the  

Accept

  key to confirm or 

Escape

 to return to general menu. 

Press the functional key to select one of the languages  
installed.

Beep On
Option:

 Enable or Disable                                                                                                                

When enabled, a short beep is heard every time a key is  
pressed. A long beep alert sounds when the pressed key  
is not active or an error is detected. Press the functional  
key to enable/disable the beeper.
Press 

Escape

 to return to the  general menu.

Instrument ID
Option: 

0 to 9999

This option is used to set the instrument’s ID (identification)                                                             
Press the 

Modify

 key to access the instrument ID screen.

Press the 

▲▼

 keys in order to set the desired value.                                                                        

Press the 

Accept

 key to confirm the value or 

Escape

 to return

to the general menu without saving the new value.

 

  Note: This ID will be used in data files exported from the monitor.

Summary of Contents for GROLINE MONITOR HI981420













































Reviews:

No comments