2 7
Press the LOG key to view the running log and page numbers.
Press the LOG key again to view the running sample number.
Step Three - Stopping the printer during the log mode:
After the third printout is completed, press the ALT and PAPER keys. At
this point the meter will continue to log data every 2 minutes but will
no longer print any information. "LOG" will blink on the secondary
display for the remainder of "L 01" (log number 1).
Note:
If the display is shut off, press TEMP to reactivate it and then
press LOG twice to view the running sample number.
Step Four - Leaving the log mode:
Once the number of samples stored in memory has reached 10, press
the ALT and LOG keys. The meter will demand a password.
Enter the password 3434 using the
and
keys.
The meter will exit the log mode after generating a log exit status
printout.
LOG
LOG
LOG
LOG
LOG
ALT
PAPER
+
ALT
LOG
+
LOG
3
4
3
4
10-01-96
==01== 0002M
0010 *00.18
