1 8
PRINTING/RECORDING
WITH HI 9271 & HI 9274
LOG
To print the measured values press PRINT.
Each printout provides the following informa-
tion:
a – The total accumulative time
b – Temperature value(s)
c – Channel numbers (
HI 9274
only)
d – Running sample number
RECORDING AT AN INTERVAL
Ensure that the appropriate recording interval has been set (see
Operational Guide on page 9).
Press the LOG key to enter the recording mode.
The log number and the interval time will
appear for a few seconds on the display to
indicate the correct operational mode.
The meter will print the measurements taken
in that moment, and will print at the selected
interval thereafter until the ON/OFF key is
pressed again.
The printout provides the following informa-
tion:
a – A running log number
b – A running sample number (in
that particular log)
c – Channel numbers (
HI 9274
only)
d – Printing interval indicator in minutes
e – The accumulated time since printing started (HH.MM)
f – Temperature value(s)
HI 9274
will print only the values of the
probes connected. If probes are added to the
remaining channels during the recording
mode, the data from the additional probes
will not be printed. Data from remaining channels can only be added
if the recording mode is exited and re-entered. A blinking "CH" will
ON/OFF
CH
°C
LOG
