1 6
Press ALT and RUN simultaneously to enter the recording mode.
The log number and the interval time will
appear for a few seconds on the display to
indicate the correct operational mode.
The meter will print the measurements taken in that moment, and
will print at the selected interval thereafter until ALT and RUN are
pressed again. The password is also requested to stop printing (unless
it remained at default 0000).
Each printout provides the following information:
a – Date (DD-MM-YY)
b – Printing interval in minutes
c – Time (HH-MM)
d – Temperature value(s)
e – A running log number
f – Running sample number (in that particular log)
g – Channel number(s)
HI 9174
will print only the values of the probes connected. If probes
are added to the remaining channels during the recording mode, the
data from the additional probes will not be printed. Data from re-
maining channels can only be added if the recording mode is exited
and re-entered. A blinking "CH" will appear on the display next to the
channel numbers not being utilized and/or recorded.
When the meter is in recording mode "LOG"
is displayed on the bottom left corner of the
LCD together with time and the printing in-
terval.
If no keys are pressed, the meter goes to standby mode to prolong the
battery life while the recording function remains active.
To reactivate the display press TEMP.
Notes:
• Once in the recording mode, the printer cannot be stopped unless
the password is entered (unless the password is 0000).
ALT
RUN
+
TEMP
