19
If no data was logged for the selected measurement range, the
instrument displays the following messages:
• “NO MANUAL LOGS”
• “NO STABILITY LOGS”
Press
GLP/CFM
key to enter inside lot information to view recorded
data. Use the
keys to toggle between different records.
Use
RANGE/
u
to display GLP data including calibration information, date, time, etc.
Press
SETUP/CLR
key then
GLP/CFM
key when deleting records or lots.
Press
RCL
key to exit the logging type.
Press
RCL
key to return to the measurement screen.
Delete Logging Type/Lot
Press
RCL
followed by
GLP/CFM
key.
Use the
keys to select the Manual/Stability records or Interval lots to delete.
Press
SETUP/CLR
key. The instrument will display “CLEAR MANUAL” for Manual Records, “CLEAR
STAB” for Stability Records.
For Interval lots, the message “CLEAR”, followed by the selected lot will
be displayed with “CFM” tag blinking.
Press the
keys to select a different lot. Press
GLP/CFM
key. The
instrument will display “PLEASE WAIT”.
“CLEAR DONE” is displayed for a few seconds after the selected Interval
lot is deleted.
Delete Records (Manual and Stability log on demand)
To delete individual records (Manual and Stability logs only), enter
Manual (Stability) log by pressing
GLP/CFM
key when Manual (Stability) is displayed.
Use the
keys to select the record to be deleted and then press
SETUP/CLR
key.
The instrument will display “CLEAR REC.“ and record number along
with “CFM” tag blinking. Use the
keys to select another record
if necessary.
SETUP/INST
ALLA
TION
Summary of Contents for edge DO
Page 1: ...DO INSTRUCTION MANUAL ...