Hanna Instruments edge DO, Instruction Manual

Page: 15 / 36

15
Option Description Choices Default
Set Auto Off
Used to save battery life by
automatically turning off when no
key press is detected for time set
and meter is not in active logging
or calibration mode.
5, 10, 30, 60 Min
or Off
10 MIN
Sound
If enabled, a short audible tone
is produced for key stroke or
calibration confirmation and a
longer tone for wrong key.
On or Off On
Temperature Unit
Select degree Celsius or Fahrenheit
scale for displayed and logged
temperatures.
ºC or ºF ºC
LCD Contrast
Permits modification of the display
contrast for various lighting
conditions.
1 to 8 3
Flash Format*
Only seen when log
errors are present.
Permits formatting the flash drive. On or Off OFF
Message Transition
User may choose how messages
are displayed on third LCD line of
display.
Word scroll messages or
letter scroll messages Letter scroll
messages
Reset Config To Default
Press the CAL/MODIFY key and GLP/CFM key (when prompted) to reset
parameters.
Instrument Firmware/
Probe Firmware
Displays firmware version of
meter. Using the
RANGE/
u
key
switches to Probe firmware (if
connected) and diagnostic made
for troubleshooting. View only
Current
firmware
version.
Meter ID/
Meter SN/
Probe SN
User ID and Serial Number of
meter and probe (if connected).
Use
RANGE/
u
key to change
between the three parameters.
Meter ID is user
selectable 0000/ Serial
Number
Note: Options that are seen under special conditions only.
SETUP/INST
ALLA
TION