![background image](http://html1.mh-extra.com/html/hanna-instruments/bl1-5/bl1-5_instruction-manual_3671576019.webp)
19
EXAMPLE OF TYPICAL INSTALLATIONS
FLOODED SUCTION INSTALLATION
Suggested Installation for consistent
output when using a low stroke rate.
Also suggested for highly viscous
chemicals.
A slight suction pressure avoids
self-priming problems, especially
with high viscosity liquids.
SUCTION LIFT INSTALLATION
Suggested installation for most
in-line applications with nominal
output and pressures.
The maximum self-priming height
is 1.5 m (5 ft.). It is advisable to
install a level controller in order to
stop the pump when feed tank
liquid level is low.
Summary of Contents for BL1.5
Page 11: ...11 VALVE HOSE ASSEMBLY DIAGRAM...