![background image](http://html1.mh-extra.com/html/hanna-instruments/bl1-5/bl1-5_instruction-manual_3671576015.webp)
15
PERMANENT CONNECTION USING 3/8"PVC PIPE
All piping for the pump feed and
discharge should be plumbed to
the location of the pump.
The threads on both valve assemblies
allow the use of standard 3/8"
(European) pipe fittings for
permanent pipe connections.
The foot valve assembly
(
HI 721005
) should always hang
vertically and not lay horizontal
on the bottom of the tank or
drum.
A vertical assembly will ensure
that the valve is positioned properly
and prevent loss of prime.
For the U.S. standard installations,
use PVC adapters to connect the
suction and discharge valves to
the PVC pipe.
HOSE CONNECTIONS
• Cut a long enough section
of the hose to reach the
suction valve of the
pumphead from the feed
tank. Allow some slack in
the hose and be sure it is
not kinked or twisted.
U
NION
C
ONNECTION
A
DAPTER
D
ISCHARGE
V
ALVE
P
UMP
S
UCTION
V
ALVE
A
DAPTER
F
OOT
V
ALVE
F
ILTER
Diagram for Rigid Pipe Hose
-
Summary of Contents for BL1.5
Page 11: ...11 VALVE HOSE ASSEMBLY DIAGRAM...