Hanlong Technology Co., Ltd Unicorn 60x0 User Manual Page 22 of 25
Firmware
1.0.0.29 Last Updated 8/2010
authentication. Can be identical to or different from
SIP User ID.
Password
SIP service subscriber’s account password for
Unicorn 600x to register to (SIP) servers of ITSP.
Name
Name
Profile ID
Select the corresponding Profile ID (1/2)
Unconditional Call
Forward to VOIP
Calls are unconditionally forwarded to the specified
VoIP phone number once users dial the FXO port PSTN
number
Enable PSTN
Disconnect Tone
Detection
If set to
Yes
, arrived Busy Tone is used as the
disconnect signal.
PSTN Disconnect
Tone
This configuration should be configured by the VoIP
service provider. Some country use single frequency
tone to signal PSTN disconnection, some country use
double frequency tone. This setting can be configured
to suit the telephone company’s standard in different
country.
Enable Polarity
Reversal Disconnect
If set to
Yes
, the Polarity Reversal is used as the
disconnect signal.
Enable Terminate Call
After PSTN Silence
Timeout
If set
Yes
, the device terminate the call when Silence
timer expire.
PSTN Silence Timeout
Silence timer value, default is 60 minutes.
Number of Rings
Number of rings for a PSTN incoming call to FXO port
before FXO port picks up, default 2
Min Delay Before Dial
PSTN(ms)
Default is 500ms. This needs to be equal to or greater
than the Current Disconnect threshold setting. Once the
threshold is reached the gateway can dial out. This
parameter should only be used if there are PSTN line
detection issues.
DTMF Digit
Volume(dB)
Default value is 11dB.
DTMF Digit
Length(x10ms)
Digit length and Dial Pause are port digit dialing
configurations; FXO needs to dial out digits for VOIP to
PSTN 1 stage calls, and unconditional call forward to
PSTN, and route to PSTN. Digit Length is the play time
for each digit.
Note: In order to receive the caller ID information, the
delay should be set to a value larger than the delay
required to complete the PSTN caller ID delivery.
Please note that the value will be multiplied by 10ms.
