Hanlong Technology Co., Ltd Unicorn 60x0 User Manual Page 23 of 25
Firmware
1.0.0.29 Last Updated 8/2010
DTMF Dial
Pause(x10ms)
Dial pause is the time between 2 digits for the same
scenario as explained above.
Please note that the value will be multiplied by 10ms.
Stage Method(1/2)
This configuration is applicable for VoIP to PSTN calls
and indicates one or two stage dialing methods.
Unconditional Call
Forward to PSTN
Calls are unconditionally forwarded to the specified
PSTN phone number once users dial the FXO port
VoIP number. Each port can be setted independence.
5.4
Saving The Configuration Changes
Once a change is made, press the “Update” button in the Configuration Menu. The
Unicorn 60x0 will display the following screen to confirm that the changes have been
saved. To activate changes, reboot or power cycle the Unicorn 60x0 after all changes are
made.
FIGURE 5: Screen-Shot Of Save Configuration
5.5
Rebooting From Remote
The administrator can remotely reboot the unit by pressing the “Reboot” button at the
bottom of the configuration menu. The following screen will indicate that rebooting is
underway.
FIGURE 6: Screen-Shot Of Rebooting
