background image

                                                                                         

 

Hanlong Technology Co., Ltd           Unicorn 60x0 User Manual                    Page 4 of 25 

                                                                       

Firmware 

1.0.0.29                  Last Updated 8/2010

 

1.3 

Warranty 

Hanlong has a reseller agreement with our reseller customer. End users should contact 

the company from whom you purchased the product for replacement, repair or refund. 

If you purchased the product directly from Hanlong, contact your Hanlong Sales and 

Service Representative for a RMA (Return Materials Authorization) number.  Hanlong 

reserves the right to remedy warranty policy without prior notification. 

2  PACKAGING 

Unpack and check all accessories. The Unicorn 60x0 package contains: 

 

One Unicorn 60x0 VoIP adapter 

 

One universal power supply 

 

One Ethernet cable 

2.1 

Connect The Unicorn 60x0 

Managing the Unicorn 60x0 gateway and connecting the unit to the VoIP network is very 

simple. Follow these four (4) steps to connect your Unicorn 60x0 gateway to the Internet 

and access the unit’s configuration pages. 

1. Connect PSTN Line to the FXO1-FXO8 ports. 

2. Insert the Ethernet cable into the WAN port of Unicorn 60x0 and connect the other end 

of the Ethernet cable to an uplink port (a router or a modem, etc.) 

3. Connect a PC to the LAN port of Unicorn 60x0 for initial configuration or if it is being 

used as a router. 

4. Plug the power adapter into the Unicorn 60x0 and into a power outlet. 

Figure 1:    Diagram of Unicorn 60x0 Back Panel 

 

Summary of Contents for Unicorn 60X0


























Reviews: