Hanlong UC924 User Manual Download Page 21

Page: 21 / 149

Getting Familiar with Your Phone

Light Drown: Unregistered

23.

Hot desking

24.

ACD

25.

Zero Touch

26.

Multicast paging

Speaker

Press this button to place a call in hands-free mode.

Redial

To dial the previous dialed number.
To act as send key.

Volume

To decrease the volume.

To increase the volume.

Hold

To hold or to resume a call during a conversation.

Transfer

To transfer a call to a third party.
To enable or disable Forward feature during the idle page.

Alphanumeric keypad

To enter the phone numbers, letters and so on.

Message

To indicator the New message, and press to read.

Headset

To indicate that the phone is or not in Headset mode.

Icon Preview

Icon

Description

Network available

Network down

Line(Registered succeed)

Summary of Contents for UC924






















































































































































Search results

Summary of Contents for UC924

Reviews:

Related manuals for UC924

Brands by name

Popular brands

Hanlong UC924, User Manual

Search results

Summary of Contents for UC924

Reviews:

Related manuals for UC924

Brands by name

Popular brands