Hanil Smart R17, Operation Manual

Page: 7 / 22

Tubes arrangement
Same volume of sample should be put on tubes after you measure it exactly.
Tubes should be placed on a rotor symmetrically.
At this moment, if volume of symmetrical tube is different, a rotor and an axis of rotation can be
damaged due to severe vibration during rotation.
Location of centrifuge tubes facing each other should be symmetrical even though tube’s quantities
are same.
If tubes are not symmetrical in quantity, new tubes should be inserted to keep balance.
User is encouraged to use a scale to minimize the difference of volume between tubes containing
Samples.
In case you open tube’s lid for centrifugation by using a spin column, please lean tube’s lid against
the edge of a rotor for exact centrifugation and make sure type of tubes are same and close the lid
of rotor.
2. Installation Directions
This instruction should be applicable just in case you use tubes provided according to purpose of kit
manufacturer.
www.ihanil.com 7