Hanil Smart R17, Operation Manual

Page: 13 / 22

3. Inspection of operation
3.11 Saving and Recalling Program
Saving programs
1. Press Call/Save ( ) button.
2. Select program No. by pressing Up ( ), down ( ) button firstly and then,
press Call/Save ( ) button.
Recalling/inputting programs
1. In standby mode, press Call/Save ( ) button.
2. Press Up ( ), Down ( ) button to select No to recall.
3. Lastly press Call/Save ( ) button.
3. Press the Setup/Enter ( ) button to set menus.
▶
The initial menu is to set RPM in set-up mode.
4. Input the desired RPM by pressing up ( ), down ( ) button.
▶
If you press up/down button for about 2 seconds, it is changed to turbo function and numbers
goes up or down fast.
5. Press Left ( ) or Right ( ) button to enter Time, Temp, Accel, Decel, Rotor position and then,
press up ( ) and down ( ) button in put set values.
6. After inputting all the values, Press the Setup/Enter ( ) button to complete storing programs.
www.ihanil.com 13