Hangzhou Qifei Intelligence Technology 3WD4-QF-10B User Manual Download Page 9

Page: 9 / 52



The cycle times of power battery is 300 in normal application situation.

Application Environment Requirements



Please transport, use and store the device in the allowed humidity and temperature range.



Please do not let any liquid flow into the device.



Please do not vibrate or soak the device.



Please pack the device with default package or material with equivalent quality.

Operation and Maintenance Requirements

Warning



Please do not dismantle the device unprofessionally.



Please use soft dry cloth or use clean soft cloth and dip a little mild detergent to clean the device.



Please use the accessories provided by manufacturer and it shall be installed and repaired by professional staff.

Disclaimer



This manual is for reference only. Please refer to the actual product for more details.



Minor differences might be found in user interface, and there might be deviation between the actual value of some

data and the value provided in the manual due to the reasons such as the real environment is not stable. Please

refer to the final explanation of the company if there is any doubt or dispute.



All the designs and software are subject to change without prior written notice. The manual will be regularly

updated according to the product upgrade without prior announcement.



Please contact the supplier or customer service if there is any problem occurred when using the device.



Other trademarks and registered trademarks mentioned in the document are the properties of their respective

owners.



Please use this product within the scope allowed by local laws. Qifei shall not be liable for any illegal use.



This product belongs to a low-level crop protection UAS. Please strictly abide by the relevant product's

operating specifications. Hangzhou Qifei Intelligence Technology Co., Ltd. shall not be responsible for any

performance, safety and legal liability caused by any operation and usage control.



Please fly under the guidance of professionals. Install and use this product according to this manual. Qifei is

not responsible for accidents caused by improper installation, configuration, operation, etc.

Summary of Contents for 3WD4-QF-10B





















































Search results

Summary of Contents for 3WD4-QF-10B

Reviews:

Related manuals for 3WD4-QF-10B

Brands by name

Popular brands

Hangzhou Qifei Intelligence Technology 3WD4-QF-10B, User Manual

Search results

Summary of Contents for 3WD4-QF-10B

Reviews:

Related manuals for 3WD4-QF-10B

Brands by name

Popular brands