28
Step 1.
Note that the elevator control horn will be mounted to
the top of the elevator. Measure over 1-1/4
′′
to the right of the
fuselage tail section on the fuselage. Mark the elevator as shown
with a felt tipped pen or pencil. This mark will be the center of
the elevator control horn.
Step 2.
Place the center of the control horn on the elevator at
the mark made in the previous step. Using a felt tipped pen,
mark the hole position of the control horn.
Step 3.
Remove the control horn and drill two 1/16
′′
holes
through the elevator as marked.
Step 4.
Attach the elevator control horn using the hardware
provided (two screws and backplate) and fasten in place using a
Phillips screwdriver.
• Control horns (2)
• Control horn backplate (2)
• Control horn screw (4)
• Fuselage
• Drill
• 1/16
′′
drill bit
• Felt tipped pen or pencil
• Medium Phillips screwdriver
• Ruler
Parts Needed
Tools and Adhesives Needed
Section 8: Installing the Control Horns
