background image

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE INVERSION TABLE.

SAVE THESE INSTRUCTIONS

WARNING

 - To reduce the risk of injury to persons: 

•  Read and understand all the instructions, view the instructional video, review all other accompanying documents, and inspect the 

equipment before using the inversion table. It is your responsibility to familiarize yourself with the proper use of this equipment and the 

inherent risks of inversion, such as falling on your head or neck, pinching, entrapment, or equipment failure. It is the responsibility of 

the owner to ensure that all users of the product are fully informed about the proper use of the equipment and all safety precautions.

•  Close supervision is necessary when the inversion table is used near children, or by or near invalids or disabled persons.

•  Use the inversion table only for its intended use as described in this manual. 

DO NOT

 use attachments not recommended by the 

manufacturer.

•  

NEVER

 drop or insert any object into any opening.

•  

DO NOT

 use or store product outdoors.

•  

DO NOT

 use if you are over 6 ft 6 in (198 cm) or over 300 lbs. (136 kg).  Structural failure could occur or head/neck may impact the 

floor during inversion.

•  

DO NOT

 allow children to use this machine.

•  Keep children, bystanders, and pets away from machine while in use.

•  Keep body parts, hair, loose clothing and jewelry clear of all moving parts.

•  The inversion table has no user serviceable parts.

•  This product is intended for indoor home use only.

 DO NOT 

use in any commercial, rental or institutional setting.

FAILURE TO FOLLOW INSTRUCTIONS AND WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH.

BEFORE YOU BEGIN:

 Review all steps before beginning assembly and read all precautions before using the inversion table. 

Carefully adhere to the Assembly Instructions and Owner’s Manual to help ensure safety and product integrity. 

1

WARNING

!

Summary of Contents for EP-550




















Reviews: