9
STEP 2 Tri-Grip Handle Assembly (EP-550 Models)
Based on your model, the assembly in this step will differ.
For users with the EP-550, assemble the Tri-Grip Handles
• Locate the
Tri-Grip Handle Assembly
Hardware Kit.
• Determine the left or right Handles, marked with an embossed L / R on the inside of the
black plastic part of each handle.
• Align the black plastic part of the corresponding handle (left / right) over the outside edge of
the Hinge Plate on the A-Frame (Figure 2).
• Insert and loosely hand-tighten three of the Allen Head Bolts through the Hinge Plate into the
inside of the handle (Figure 3).
• Repeat with other handle. Fully tighten all fasteners, using the 5mm Allen Wrench provided.
FIGURE 2
FIGURE 3
