41
LEFT
DOOR
5/16" (0,8 cm) Drill Bit
PARTS REQUIRED:
DOOR HARDWARE
Mark and pre-drill holes for screws. Install bolt with screws supplied.
Drill 5/16" (0,8 cm) hole deep enough for bolt to slide into.
2
3
4
Place bolt on
OO
in open position with bolt end 3/8" (0,8 cm) down from frame.
Bolt is open when loop is contacting base
(Fig A)
.
1" (2,5 cm)
Screws
HINT:
With door closed
extend bolt and tap with
hammer to leave a mark
in wood for drilling.
x2
Fig. A
Fig. B
OO
OO
Place bolt on
OO
in open position with bolt end 1/2" (1,3 cm) up from floor. Bolt is
open when loop is connecting base (Fig. B).
Mark and pre-drill holes for screws. Install bolt with screws supplied.
Drill 5/16" (0,8 cm) hole deep enough for bolt to slide into.
Your spring bolts are now installed.
FINISH
5/16" (0,8 cm)
drill for bolt
1" (2,5 cm) deep.
1/2"
(1,2 cm)
OPEN POSITION
spring is loose.
OVER DOOR
FRAME
FLOOR
Loop contacts
base
Loop contacts
base
OPEN POSITION
spring is loose.
3/8" (0,8 cm)
with bolt
in open
position.
PRE-DRILL (4)
HOLES Install
3/4" (1,9 cm)
Screws
PRE-DRILL (4)
HOLES Install
3/4" (1,9 cm)
Screws
BEGIN
1
x8
3/4" (1,9 cm)
