H&S BW1000 LINEWRAP BW1000 LINEWRAP, Operator'S Manual

Page: 30 / 38

-28-
Your H&S LINEWRAP was manufactured with operator safety in mind. Located on the wrapper are
various decals to aid in operation, and warn of danger or caution areas. Pay close attention
to all decals on your LINEWRAP.
DO NOT REMOVE ANY OF THESE DECALS. IF DECALS ARE LOST, DAMAGED, OR
IF LINEWRAP IS REPAINTED, REPLACE DECALS. REMEMBER: DECALS ARE FOR
YOUR PROTECTION AND INFORMATION.
Listed below are the decals on your LINEWRAP. These decals may be ordered individually by part
number or by ordering a complete set.
PART # QTY DESCRIPTION
311 1 Patent Number
1297A 1 Wrapper Start
5896C 2 Warning - Emergency Stop Function
8489 1 Back LH Decal
8490 1 Back RH Decal
8491 1 Front Decal
8492 1 RH Side Decal
8493 1 LH Side Decal
11599 2 Warning - Stay Clear of Leaks
12097A 1 Tail Down - Tail Up Down
12797B 1 Pusher Stop
21797A 1 Electric Switches Decal
31500 1 Charge Battery Before Use
31704 1 Attn: Dealer (Battery Dry)
32597A 1 Warning - Do Not Operate
32597B 3 Danger - Stay Clear
32597C 5 Danger - Shut Engine Off
32597D 2 Warning - Do Not Operate
32597E 2 Warning - Do Not Remove Shields
41097A 1 If LIinewrap is setting... Disconnect Ground Terminal
54033 1 Made in U.S.A. 3”
55907 1 ATTENTION: Turn the fuel valve on the engine to the off position.
58654 1 Measurement to adjust hoop start/stop switches for bale length
72203A 1 Warning Help Avoid Injury
81910 2 Film Wrap Diagram
1202177 4 Pull To Stop
B6DC 2 H&S Decal (3x6)
DCAMB 2 Amber Reflector
DCRED 2 Red Reflector
LW112901 1 Optional Remote Steering Indicator
093020 14 Grease Zerk
DECAL LOCATION