background image

GB

50

Quality approval

The stove has been tested by the 
Swedish National Testing and 
Research Institute and meets 
the applicable regulations for 
CE approval and the stricter 
requirements for P marking. 
Certificate number for 
P Marking: 22 03 16.

Manufacturer’s assurance

Manufacture of the product 
has taken place in accordance 
with those documents which are 
the basis for the relevant type 
approval certification and the 
required manufacturing checks.

Requirements for flue

The chimney must be dimen-
sioned for at least 350° C for 
both top connection directly 
upwards and connection directly 
backwards from the rear of the 
stove.

Handöl 50 is the first cast iron 

stove in the world to be swan 

marked

As the premier stove 
manufacturer in Sweden, 
we at NIBE Brasvärme are 
committed to Swan marking 
our stoves. Choosing to Swan 
mark our products is one aspect 
of our vision to be a company 
of the future with equally high 
quality standards regarding the 
environment.
Certifcate number 378-001.

Certifierad

Certifikat nr

22 03 16

NOTE! 
Notify the local building authorities of the new installation

Report installation of a stove to your local authority.

The owner of the house is personally responsible for ensuring 
compliance with the mandatory safety requirements and must 
have the installation approved by a qualified inspector.

Your local chimney sweep must also be informed about the 
installation as this will affect the routines for regular chimney-
sweeping services.

EU-declaration
of conformity

Product covered by this declaration
Product type
 

Stove fired by fixed fuel

Type designation 

Handöl 50-series

Type acc. to standard  SS-EN 13240
Intended for use 

Heating of living accomodation

Fuels 

Wood logs

Special conditions 

None

Manufacturer

Name 

NIBE AB/NIBE Brasvärme

Address 

Box 134, Skulptörvägen 10, SE-285 23 MARKARYD

Place of manufacture  Markaryd

Manufacturing check by approved organisation

Name 

Swedish National Testing and Research Institute AB

Address 

Box 857, SE-501 15 BORÅS

Report no / date 

-/-

 

 

Niklas Gunnarsson
Business area manager NIBE Stoves

Appendices
•    Assembly and Installation Instructions

HANDÖL

In accordance with standards below
marking was affixed:
European Standard:
SE Quality Certification, P-marked:
NO Standard NS 3059:
DK Standard:
DE and AT Standard DIN 18 891
and Art 15a B-VG:
Type:
Nominal Output:
Fuel:
Minimun draught:
Flue gas temerature:
Energy efficiency:
Emission of CO in cumbustion products:
Distance to cumbustible wall (mm):

Production number:

Follow the installation instructions.
Use only recomended fuels
NIBE AB Box 134 SE-285 23 MARKARYD AWEDEN

2006
EN 13240
Cert no 220316
SINTEF 043-xxx
xxxDS/EN 13240 plus

XX-91xxxx
H51/H52/H52T
5 kW
Wood
12 Pa
275°C
79%
0,13%
Behind 150
Beside 500 
Corner 150

HANDÖL

NIBE AB SE-85 21 Markaryd Sweden

Type:

Production no.

50-series
7090300236

HANDÖL

In accordance with standards below
marking was affixed:
European Standard:
SE Quality Certification, P-marked:
NO Standard NS 3059:
DK Standard:
DE and AT Standard DIN 18 891
and Art 15a B-VG:
Type:
Nominal Output:
Fuel:
Minimun draught:
Flue gas temerature:
Energy efficiency:
Emission of CO in cumbustion products:
Distance to cumbustible wall (mm):

Production number:

Follow the installation instructions.
Use only recomended fuels
NIBE AB Box 134 SE-285 23 MARKARYD AWEDEN

2006
EN 13240
Cert no 220316
SINTEF 043-xxx
xxxDS/EN 13240 plus

XX-91xxxx
H53/H54/H54T
5 kW
Wood
12 Pa
275°C
79%
0,13%
Behind 150
Beside 470 
Corner 150

HANDÖL

NIBE AB SE-85 21 Markaryd Sweden

Type:

Production no.

50-series
71222200116

378

001

NO

RD

IC ECOLAB

EL

Summary of Contents for 51

















Reviews: