GB
61
Adjusting and connecting
Preparations before rear connection
The stove is prepared for top connection on delivery. When connecting
from the rear, the cover and connection must be swapped around.
• Dismantle the cladding as instructed previously, see page 55.
• Tap out the knock out in the stove’ s back panel, remember to protect
the floor.
• Then unscrew both the connector and the cover.
• Switch places and reinstall the screws.
Handöl 53
Adjusting the stove
• Position the stove on the hearth plate.
• Uninstall the rear sections of the legs.
• Adjust the height of the four adjustable feet until
the stove is horizontal.
• When the rear sections have been reinstalled, cover
the screws with the plastic plugs supplied.
50
Continue with the section ”Connecting to the chimney” on page 64.
