background image

Easy Hotspot Kit 

48

Item 

Default 

Description 

Service Name 

Empty 

Enter the service name provided by your ISP. The service 

name can consist of up to 64 alphanumeric characters and is 

case sensitive. 

Connect on Demand and Max Idle Time 

Connect on Demand  Enable 

You  can  configure  your GuestWiFi to cut your connection 

with your ISP after a specified period of time (Max Idle Time). 

If you have been disconnected due to inactivity, Connect on 

Demand enables your GuestWiFi to automatically 

re-establish your connection as soon as you attempt to 

access the Internet again. If you wish to activate Connect on 

Demand, click the radio button. If you want your Internet 

connection to remain, click the radio button of keep alive. The 

Max Idle Time maximum value is 65535 minutes. 

Max Idle Time 

10 Minutes

Keep alive and Redial Period 

Keep alive 

Disable 

This option keeps your PPPoE enabled Internet access 

connected indefinitely, even when it sits idle. The Redial 

Period maximum value is 65535 seconds. 

Redial Period 

30 Seconds

 

Summary of Contents for GW-1


























































































Reviews: