Handlink Technologies GW-1, User Manual

Page: 52 / 89

Item Default Description
DHCP Server Enable
There are three types of DHCP Services.
DHCP Disable—Disable the DHCP server function.
DHCP Relay—Enable DHCP Relay function.
DHCP Server—Enable DHCP server function.
DHCP Relay
To route DHCP through an external server, the administrator needs to
enable the DHCP relay and assign a valid DHCP server IP address.
DHCP Server IP Address Empty Enter the IP address of DHCP server.
DHCP Server
The GuestWiFi's DHCP server is turned on and running by default
when you install it in your network.
DHCP Pool Starting
Address
10.59.1.2 Enter the DHCP Pool Starting IP address.
Pool Size 253 The DHCP pool size range is 1 to 512.
Lease Time
300
Minutes
The DHCP lease time. The DHCP lease time range is 1 to
71582788 minutes.
Primary DNS Server 168.95.1.1 Enter the IP address of the network’s primary DNS server.
Secondary DNS Server Empty Enter the IP address of a second DNS server on the
network.
Email Server Redirect To prevent some subscriber’s original Email server may protect by
firewall or NAT network. GuestWiFi provides an extra Email server
parameter to forward the subscriber’s Email. The GuestWiFi not only
forwards the subscribers’ E-mail via other E-mail server but also
changes the SMTP header. The recipient of your E-mail sees the
message as if you sent it from your local Internet Service Provide, not
form the hotel or other place. Note: Before setting this sever, please
make sure the e-mail sever relay function is opened. It must not
exceed 50 characters.
IP Address or Domain
Name
Empty Enter the E-mail server IP address or domain name.
SMTP Port 25 Enter the SMTP port number for mail server. The SMTP
port allowed range is 25 or 2500 to 2599.
Click Apply button to save the new settings.
Easy Hotspot Kit 52