1-4-2
Rear Panel
The rear panel of the GuestWiFi is shown below.
Figure 3 GuestWiFi Rear Panel
1. LAN (1-4):
The rear panel supports four auto-sensing RJ-45 ports and all ports can be auto-switched to MDI-II
connections. The LAN ports used for linking hosts or other network devices. The individual port can be
either connected to 100BaseTX networks or 10BaseT networks. When connecting to a 100BaseTX
network, the ports operate at 100Mbps in half-duplex mode or 200Mbps in full-duplex mode. When
connecting to a 10BaseT network, the ports operate at 10Mbps in half-duplex mode or 20Mbps in
full-duplex mode.
2. WAN:
One Ethernet port used for linking xDSL or Cable Modem.
3. Reset Button:
The GuestWiFi has a reset button at the rear panel of the device. Use this function to reset the system
back to factory defaults.
4. Power Jack:
Used to connect the external power supply with the GuestWiFi.
1-5 Technical Specifications
1-5-1
Hardware Specifications
Network Specification
IEEE802.3u 10BaseTx Ethernet
IEEE802.3u 100BaseTX Fast Ethernet
IEEE802.11b/g/n Wireless LAN
ANSI/IEEE 802.3 NWay auto-negotiation
Wi-Fi Compatible
Connectors
Easy Hotspot Kit
7
Summary of Contents for GW-1
Page 24: ...Step 5 System Setting Figure 16 System Setting Screen Easy Hotspot Kit 24 ...
Page 29: ...z Log Categories Figure 20 Log Settings Screen Easy Hotspot Kit 29 ...
Page 68: ...Easy Hotspot Kit 68 Figure 59 Example information windows Screen ...
Page 73: ...Figure 65 System Status Screen Easy Hotspot Kit 73 ...
