Handlink Technologies GW-1 User Manual Download Page 46

Page: 46 / 89

DHCP Client

The device can work as a DHCP client. This allows the device to obtain the IP address and other

TCP/IP settings from your ISP. If your xDSL/Cable comes with this feature, please enable Use DHCP

Client.

Figure 35 DHCP Client Setting Screen

Static IP

Figure 36 Static IP Setting Screen

Item

Description

IP Address

Enter the IP address for the xDSL/Cable connection (provided by your

ISP).

Subnet Mask

Enter the subnet mask for the IP address.

Gateway IP Gateway

Enter the Gateway IP address for the xDSL/Cable connection (provided by

your ISP).

Primary DNS Server

A primary DNS server IP address for the xDSL/Cable connection (provided

by your ISP).

Secondary DNS Server A secondary DNS server IP address for the xDSL/Cable connection

(provided by your ISP). If the primary DNS Server IP were not available,

meanwhile, Secondary DNS Server IP would start in the same time.

Easy Hotspot Kit

Summary of Contents for GW-1


























































































Search results

Summary of Contents for GW-1

Reviews:

Related manuals for GW-1

Brands by name

Popular brands

Handlink Technologies GW-1, User Manual

Search results

Summary of Contents for GW-1

Reviews:

Related manuals for GW-1

Brands by name

Popular brands