Operating instructions
19
•
Loosen knob A, see Figure 16 op pagina 18.
•
Take the arm rest from its guide.
Removing the head rest:
To remove the head rest, see "Head rest (optional)
3.2.10
Installing the seat belt (optional)
If you have chosen to install a seat belt, this is done using the rear Allen key, see Figure 4 on page 13.
Warning!
A seat belt on a wheelchair only serves to provide support. It must not be used as a car seat belt.
3.2.11
Adjusting the control programme
The wheelchair has been provided with programmable controls.
Do not attempt to change the settings of the programme yourself. A programming cabinet is needed for this.
Only your dealer is able to change certain settings for you.
Warning!
Changing the settings may affect safety and performance features. Ask your dealer for details.
3.3 Driving
3.3.1 Getting
in
Before being seated in your wheelchair:
•
Make sure the wheelchair is switched off.
•
Make sure the wheelchair is NOT in neutral.
•
Check the tyre pressure.
Fold the foot plates up and/or swivel the leg rests aside and be seated in the wheelchair.
on/off switch
alarm lights
(2 direction indicators
press simultaneously)
left-hand side
direction indicator
speed indicator
reduce speed
adjustment left-hand side
leg rest
back angle adjustment
Joystick (with more functions in
combination with function key)
horn
battery-condition indicator (and
fault indicator))
direction indicator right
increase speed
lighting switch
right-hand side leg-rest
adjustment
tilt adjustment
high/low adjustment
Figure 17
