handi quilter HQ Amara 20 User Manual Download Page 59

Page: 59 / 78

58 |

www.HandiQuilter.com

Needle Laser

The Amara comes equipped with a needle laser. It precisely shows where the

needle will enter the quilt. Turn the laser on or off with the Laser settings.

To turn the laser on or off

• Touch the Settings icon in the Toolbar. Then touch the Laser button. Touch

the toggle button to turn the laser on or off.

Alarms

The alarm settings enable you to quickly turn on or off the alarms for the low bobbin, thread breaks, and

over-speed.

Low-bobbin alarm: Alerts you when the low-bobbin threshold has been reached, indicating you will soon

run out of bobbin thread. For more information about the low-bobbin alarm, see Low-Bobbin Alarm above.

Thread-break alarm: Alerts you if the top thread breaks while quilting.

Over-speed alarm: Alerts you if you are moving the machine faster than 100% of motor capacity and

therefore are quilting too fast for stitch regulation to work properly. Because of the high speeds that the

Amara can handle, you will most likely never encounter this alarm.

Control the needle laser.

Light is currently on.

Touch the toggle

button to turn

the laser on

or off.

Summary of Contents for HQ Amara 20















































































Search results

Summary of Contents for HQ Amara 20

Reviews:

Related manuals for HQ Amara 20

Brands by name

Popular brands

handi quilter HQ Amara 20, User Manual

Search results

Summary of Contents for HQ Amara 20

Reviews:

Related manuals for HQ Amara 20

Brands by name

Popular brands