handi quilter HQ Amara 20 User Manual Download Page 27

Page: 27 / 78

26 |

www.HandiQuilter.com

The Amara uses the 134 needle system. Note that the needle has a

round shank rather than a shank with a flat side like home sewing

machines use.

If you use the recommended needle, you will experience:

• Fewer skipped stitches

• Less needle breakage

• Less thread breakage, especially at high speeds

• Less thread splicing or shredding

• Optimum fabric protection

IMPORTANT: Change the needle regularly. We recommend you use a new needle for each new quilt

and any time the needle becomes bent, dull, or burred.

CAUTION: A damaged needle may result in poor stitching quality or may even damage the machine

or your quilt.

To change the needle

ONLINE: For more information about replacing the needle, watch the video Replacing the Needle

at: http://www.HandiQuilter.com/Amara/needle.

1. Move the needle bar to the up position by pressing the needle up/down control on the handlebar.

2. Turn off all power to the machine.

3. Loosen the needle bar clamp screw with the

2.5mm hex wrench.

4. Remove the old needle by pulling it down. Discard the old needle in a safe way.

Sight hole

Needle bar clamp

screw

Summary of Contents for HQ Amara 20















































































Search results

Summary of Contents for HQ Amara 20

Reviews:

Related manuals for HQ Amara 20

Brands by name

Popular brands

handi quilter HQ Amara 20, User Manual

Search results

Summary of Contents for HQ Amara 20

Reviews:

Related manuals for HQ Amara 20

Brands by name

Popular brands