handi quilter HQ Amara 20 User Manual Download Page 35

Page: 35 / 78

34 |

www.HandiQuilter.com

Quilting With the Amara

Preparing to Quilt

1. Make sure your machine has been cleaned, oiled, has a new needle, and that the tracks on the frame

are free from threads or other debris. If the machine isn’t already plugged in, plug it in now.

2. Select your thread and wind one or more bobbins.

3. Turn on the main power switch at the back of the machine and then use the front power button on the

left side of the machine to turn the machine on or off as needed.

4. Set your bobbin tension and thread your machine.

5. After loading your quilt, use a scrap of fabric along the edge of the quilt backing and batting to test your

top tension. Make adjustments to the top tension as needed.

To load the quilt

ONLINE: For more information about loading the quilt using ClearView mode of the

Quiltmaster

DuoLoad system, watch the video HQ Studio2 Frame ClearView Load at:

http://www.HandiQuilter.com/HQStudio2/clearview.

ONLINE: For more information about loading the quilt using Standard mode of the

Quiltmaster

DuoLoad system, watch the video HQ Studio2 Frame Standard Load at:

http://www.HandiQuilter.com/HQStudio2/standard.

To bring bobbin thread to the top of the quilt

ONLINE: For more information about starting and stopping quilting and

programming handlebar buttons, watch the video Bringing Up the Bobbin Thread at:

http://www.HandiQuilter.com/Amara/bobbinthread.

1. After the machine is threaded, move the machine over the quilt to your

starting location.

2. While firmly holding the tail of the needle thread, press the needle

up/down button twice, causing the needle to go down through the

quilt sandwich and then back to the up position.

3. Move the machine two to three inches while holding the needle thread in place. The bobbin thread

will pull through to the top of the quilt.

4. Grasp the bobbin thread and pull it to the desired length. Reposition the needle to the starting

location. Manually tie off the threads by quilting a few very tiny stitches or use the automatic Tie-off

feature by pressing the Tie-off button on the Home screen and slightly move the machine. Press the

Start/Stop button to begin quilting.

Summary of Contents for HQ Amara 20















































































Search results

Summary of Contents for HQ Amara 20

Reviews:

Related manuals for HQ Amara 20

Brands by name

Popular brands

handi quilter HQ Amara 20, User Manual

Search results

Summary of Contents for HQ Amara 20

Reviews:

Related manuals for HQ Amara 20

Brands by name

Popular brands