handi quilter HQ Amara 20 User Manual Download Page 58

Page: 58 / 78

HQ Amara User Manual

| 57

To configure the star and diamond buttons on the handlebars

1. Select the down arrow next to the star or diamond to display a drop-down box with the options for the

star and diamond buttons.

2. Touch your selection for the button.

The options for customizing the star and diamond buttons are:

Option

Action Performed

None

The button will not perform a function.

Start/Stop

Starts or stops stitching

Needle Up/Down

Performs a half stitch by cycling the needle up or down

Increase

Increases stitching speed in manual or SPI in regulated

Decrease

Decreases stitching speed in manual or SPI in regulated

Tie-Off

Performs a tie-off stitch

IMPORTANT: If you use Pro-Stitcher, it will override your settings for the star and diamond

handlebar buttons for selected Pro-Stitcher functions. For more information about using

Pro-Stitcher with the Amara, refer to the Pro-Stitcher user manual.

Touch the star or

diamond to select

the function from

the drop-down

menu.

Summary of Contents for HQ Amara 20















































































Search results

Summary of Contents for HQ Amara 20

Reviews:

Related manuals for HQ Amara 20

Brands by name

Popular brands

handi quilter HQ Amara 20, User Manual

Search results

Summary of Contents for HQ Amara 20

Reviews:

Related manuals for HQ Amara 20

Brands by name

Popular brands