HandHeld Nautiz X4 Manual Download Page 51

Page: 51 / 71

NAUTIZ X4

Manual Version 1.1

handheld

9.2.

Power properties

9.2.1.

Battery tab

To see main battery level indicators open

Start > Settings > System > Power icon .

Set up the USB charging and On / Off

9.2.2.

Advanced tab

To adjust power management settings,

1.  Set idle time when on battery power before device suspends.

2.  Set idle time when on external power before device suspends.

3.  To exit, press

from the command bar, or press the

< ENT >

key on the keypad.

☞

To save battery life it is recommended to set idle time as short as possible.

9.2.3.

CPU Power Tab

To adjust CPU power settings,

1. Auto Power : Enable automatically CPU power control to maximize battery life.
2. Manual Power : CPU Clock can be fixed by User.

9.2.4.

Alerts Tab

Adjust the level of main battery for Low battery message and Critical battery message.

Summary of Contents for Nautiz X4








































































Search results

Summary of Contents for Nautiz X4

Reviews:

Related manuals for Nautiz X4

Brands by name

Popular brands

HandHeld Nautiz X4, Manual

Search results

Summary of Contents for Nautiz X4

Reviews:

Related manuals for Nautiz X4

Brands by name

Popular brands