HandHeld Nautiz X4, Manual

Page: 31 / 71

NAUTIZ X4
Manual Version 1.1
30
handheld
4.19. Managing Main Battery Power
Data and files saved on the Handy Terminal may be stored in RAM memory; therefore, maintain a continuous
power supply to the terminal to help prevent data loss. When you remove a battery pack, insert another
charged battery pack in the Handy Terminal. If the main battery pack is low, insert the terminal into a charging
peripheral to power the terminal and begin recharging the battery.
☞
If the main battery is low and the terminal is in Suspend Mode, pressing the Power button does not wake the HANDY
TERMINAL; you must replace the discharged battery with a fully charged battery or apply AC power to the terminal.
Checking Battery Power
Tap the battery icon to open the Power Properties. The Battery tab opens displaying the charge status of the
main battery
☞
You can also check battery power by tapping Start -> Settings -> System -> Power .
4.20. Resetting the Terminal
There are three types of system resets: a Soft Reset, a Hard Reset, or a Factory Reset. The soft and hard
resets preserve all data stored in the file system.
Soft Reset (Warm Boot)
A soft reset re-boots the terminal without losing RAM data, terminates all running applications, reloads the OS,
and launches Autoinstall, which re-initializes any CAB or REG files in \AutoInstall\Cabfile folder
You would perform a soft reset 1) when the terminal fails to respond, 2) after installing software applications
that require a reboot, or 3) after making changes to certain system settings, or 4) to install new CAB or REG