HandHeld Nautiz X4, Manual

Page: 32 / 71

NAUTIZ X4
Manual Version 1.1
31
handheld
files.
To perform a Soft Reset:
1. Press the Power button for 3 seconds and choose the Soft Reset on the power menu.
2. When the reset is complete, the Desktop appears.
Hard Reset (Cold Boot)
: A hard reset erases all of the data and applications stored in RAM memory, reloads the
OS, and launches Autoinstall, which installs any CAB or REG files in the \AutoInstall\Cabfile .
Hard resets automatically launch a soft reset as part of the boot process if there are CAB files present.
To Perform a Hard Reset:
1. Press the Power button for 3 seconds and choose the Hard Reset on the power menu.
2. When the reset is complete, the Desktop appears.
To perform a Hard Reset if the terminal has stopped responding, press and hold the Power button for 8
seconds until the terminal starts to re-boot.
Factory Reset
To prevent data loss, back up all user data to an SD card or external memory device before performing an
upgrade or factory reset.
To Perform a Factory Reset:
1. Perform a Hard Reset
2. The terminal will reboot automatically and you will see first booting screen
3.
Press “1277” when version information is displayed and then you will enter bootloader menu.
4.
Press “12” to perform a factory reset.
5. When the clean boot is completed, do a touch calibration.
4.21. Suspend Mode
Suspend Mode suspends terminal operation. The terminal appears to be “off” when in Suspend Mode. The
terminal is programmed to go into Suspend Mode automatically when inactive for a specified period of time.
You can set this time period in the Power setting.
To suspend and resume operation, press the
Power button. You may also press the front Scan key to wake a
suspended device unless the battery door has been removed and replaced.
☞
You should always put the terminal in Suspend Mode when you change the battery pack; see Changing the Battery Pack on
paragraph 4.18.
Troubleshooting Suspend/Resume