HandHeld Nautiz X4 Manual Download

Page: 2 / 71

NAUTIZ X4

Manual Version 1.1

handheld

Trademarks ························································································································ 4
About the NAUTIZ X4 Handy Terminal ····················································································· 4
Accessories ······················································································································· 5

2.1.

General Safety Rules ····························································································· 6

2.2.

Power Supply ······································································································· 6

2.3.

Laser Safety········································································································· 7

2.4.

LED Safety ·········································································································· 8

2.5.

FCC RF Exposure ································································································· 8

2.6.

CB Scheme ········································································································· 8

2.7.

FCC Part 15 Regulation ·························································································· 8

2.8.

Canadian Compliance ···························································································· 9

2.9.

Radio Compliance ······························································································· 10

2.10.

WEEE Compliance ······························································································ 10

2.11.

China Compliance ······························································································· 10

3.1.

Install the Battery ································································································ 11

3.2.

Charge the Batteries ···························································································· 12

3.3.

LED Indicators ···································································································· 13

3.4.

Guidelines for Battery Pack Use and Disposal ··························································· 13

3.5.

Turn Your Device On ··························································································· 15

3.6.

Desktop ············································································································ 15

3.7.

Indicator Icons ···································································································· 16

3.8.

Using the Stylus ·································································································· 17

3.9.

Selecting Program ······························································································· 17

3.10.

Pop-Up Menus ··································································································· 17

3.11.

Using Windows Explorer ······················································································· 17

4.1.

Feature of Your Device ························································································· 18

4.2.

NAUTIZ X4 Handy Terminal ·················································································· 18

4.3.

Front Panel Layout ······························································································ 19

4.4.

Display Backlight ································································································· 20

4.5.

Keypad Backlight ································································································ 20

4.6.

Using Screen Protectors ······················································································· 21

4.7.

Installing Your Screen Protector ············································································· 21

4.8.

Back Panel Layout ······························································································ 25

4.9.

Left Side Panel Layout ························································································· 25

4.10.

Installing Memory Cards ······················································································· 25

4.11.

Right Side Panel Layout ······················································································· 26

4.12.

Top Panel Layout ································································································ 26

4.13.

Bottom Panel Layout ···························································································· 27

4.14.

Peripherals and Accessories·················································································· 28

4.15.

USB ActiveSync Cable ························································································· 28

4.16.

Li-ion Battery Packs ····························································································· 28

4.17.

Battery Power ····································································································· 28

4.18.

Main Battery Pack ······························································································· 28

4.19.

Managing Main Battery Power ··············································································· 30

4.20.

Resetting the Terminal ························································································· 30

4.21.

Suspend Mode ··································································································· 31

4.22.

Memory Allocation ······························································································· 32

Summary of Contents for Nautiz X4








































































Search results

Summary of Contents for Nautiz X4

Reviews:

Related manuals for Nautiz X4

Brands by name

Popular brands

HandHeld Nautiz X4, Manual

Search results

Summary of Contents for Nautiz X4

Reviews:

Related manuals for Nautiz X4

Brands by name

Popular brands