Semmelweis Scanner – User Guide v22.03
24
SSID
Name of the selected wifi network (cannot be edited).
Passphrase
The place to enter the password.
Show
passphrase
Check this to display the password you have already entered. You can select it by
selecting the check box with the <TAB> key, and then using the <SPACE> key to
change the status of the check box.
4.10.6.2. WPA/WPA2 Enterprise
In all cases where the network type is ieee8021x, this interface will appear.
Depending on the security mode of the Enterprise network you want to connect to, you will
need to enter different network-specific information. Supported types are PEAP, EAP-TLS,
EAP-TTLS.
Copy certificates
For the above types of networks, you may need to enter a certificate or key to connect to the
WiFi network. If you need to copy such a file to the scanner, set (
None
) value to
Copy from
USB drive
in the appropriate drop-down list.
The USB drive must be prepared as follows:
●
Must be formatted on a FAT32 file system.
●
The certificate or key files must be placed in the root directory of the USB drive strictly
with the following file names.
Certificate or Key Type
File name on the USB drive
CA certificate
ca.cert
Client certificate
client.cert
Client private key
client.key
If the value in any of the drop-down lists has been changed to
Copy from USB drive
, pressing
the
Accept
button will start a 30-second countdown with displaying
Please plug in the USB
flash drive
. Before the countdown expires, the USB drive must be plugged into the USB port
where the keyboard has been plugged in so far. The scanner detects the presence of the USB
drive, and then the files are copied. If the files cannot be copied,
Certificate/keyfile copy failed
error is displayed. You should then check that the USB drive has been prepared as described
above.
4.10.6.3. Entering DHCP or static IP address
There are two ways to enter IP addresses:
●
with DHCP settings or
●
by entering a fixed IP address.
