manualshive.com logo in svg

Hand Held Products Quick Check 200 Series, User Manual

Share
Download
Hand Held Products Quick Check 200 Series User Manual Download Page 9

 

3 

2. Overview 

The Quick Check

®

 200 Series is one of the Hand Held Products family of Quick 

Check bar code quality assurance devices. The Quick Check

®

 200 Series is fully 

portable and compatible with all major bar code symbologies.  It is effectively two 
instruments in one, both an easy-to-use Pass/Fail quick tester and a powerful 
measuring tool for detailed testing and analysis of those same symbols. 

Testing criteria within the Quick Check

®

 200 Series is based on the American 

National Standard X3.182-1990 “Bar Code Print Quality Guideline.”  The Quick 
Check family of bar code verifiers was designed specifically to fully implement 
this guideline guaranteeing symbol compliance to the standard.  They provide a 
baseline in measurement accuracy against which all verifiers, new and old, 
should be judged. 

The QC200 series determines print quality, wide to narrow ratios, print contrast 
and reflectance parameters, decodes and verifies character format as called for 
by application specifications.  The quality information from the Quick Check

®

 200 

Series is presented through an easy to read liquid crystal display (LCD), light 
emitting diodes (LEDs), audible tones and through its optional accessory printer.  
The knowledge gained using the Quick Check

®

 200 Series measurement modes 

is invaluable in educating the user about the critical optical characteristics of bar 
code symbols. 

The Quick Check

®

 200 Series can verify the quality of: 

•

  EAN/UPC family of symbols with or without addendum 

•

  Code 39 with or without check character 

•

  Interleaved 2 of 5 with or without check character 

•

  Codabar/USS Codabar with or without check character 

•

  Code 128 with all modes and characters displayed 

•

 MSI Code 

•

 Code 16K 

•

  IATA 2 of 5  

•

  Regular 2 of 5 

Summary of Contents for Quick Check 200 Series









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands