16
MSI Code Options displayed on the LCD are:
[MSI NoUsrCk>] or [MSI Mod10Ck>] or [MSI Mod11CK>]
which allows the selection of no user specified second check digit or a user
specified second check digit of either the Modulo 10 or Modulo 11 type.
NOTE: The MSI “System” Check Digit, which is inherent to the code, is displayed
on the Quick Check’s LCD line after decode. In some cases it may not be shown
as a “human readable” digit on printed samples.
If, after the initial LCD output of “- Codes - >”, the Scroll [<>] Button is pressed
twice, the operator is then prompted to select an application specification.
“Application”/Model Options
A QC200 is preprogrammed with Industry Applications according to the Model
selected. These application tests not only test the codes for generic print quality
parameters, as applied by the applications, but also test for application specific
formats, check characters and data identifiers. The selection of an application is
accomplished by turning on the QC200.
[QC2xx aa/lll] where “xx” identifies the model number.
Continue by pressing the Select [0]button two (2) times.
[ - Specs - >] is displayed.
Press the Scroll [<>] button
[ - Codes - >] is the next display.
Continue by pressing the Scroll [<>] button until the Industry Application of choice
is display. (message displays for each application are listed below.) Then press
the Select [0] button to accept this Industry Application. NOTE: Only one (1)
Industry Application may be selected at a time.
The available Industry Applications to select from include;
AIAG [ - - AIAG - - >] – Automotive applications
BOOKLAND [ - Bookland - >] – Book applications
CCBBA [ - CCBBA - >] – Blood Bank applications
Comp Tia/CTIA/ABCD [ - - ABCD - - >] – Computer applications
HIBCC [ - HIBCC - >] – Health Care applications
LOGMARS [ - LOGMARS - >] – Government applications
SCC[ - - - SCC - - - >] – Retail (SCS/ITF, EAN-128, UCC 128 Serial)